Cisco 7931G - Cisco WebDialer

4-27
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Recording Tone Indicates whether a recording tone (often referred to as
a beep tone) is enabled or disabled for the phone. If the
recording tone option is enabled, the phone plays the
beep tone in both directions of every call, regardless of
whether the call actually gets recorded. The beep tone
first sounds when a call is answered.
You may want to notify your users if you enable this
option.
Default: Disabled
Related Parameters:
• Recording Tone Local Volume
• Recording Tone Remote Volume
• Recording Tone Duration
Other related parameters—Beep tone frequency in hz,
the length of the beep tone (called duration), and how
often the beep tone plays (called interval)—are defined
on a per-Network Locale basis in the xml file that
defines tones. This xml file is usually named tones.xml
or g3-tones.xml.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Recording Tone
Local Volume
Indicates the loudness setting for the beep tone that is
received by the party whose phone has the Recording
Tone option enabled.
This setting applies for each listening device (handset,
speakerphone, headset).
Range: 0 percent (no tone) to 100 percent (same level
as current volume setting on the phone).
Default: 100
See also Recording Tone in this table.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Recording Tone
Remote Volume
Indicates the loudness setting for the beep tone that the
remote party receives. The remote party is the party
who is on a call with the party whose phone has the
Recording Tone option enabled.
Range: 0 percent to 100 percent. (0 percent is –66 dBM
and 100 percent is –3 dBM.)
Default: 84 percent (–10dBM)
See also Recording Tone in this table.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Table 4-15 Media Configuration Menu Options (continued)
Option Description To Change