Cisco 7931G - Line and Call Definitions

Contents
v
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Installing the Cisco Unified IP Phone 3-5
Securing the Phone with a Cable Lock 3-7
Mounting the Phone to the Wall 3-8
Verifying the Phone Startup Process 3-8
Configuring Startup Network Settings 3-9
Configuring Security on the Cisco Unified IP Phone 3-9
CHAPTER 4 Configuring Settings on the Cisco Unified IP Phone 4-1
Configuration Menus on the Cisco Unified IP Phone 7931G 4-1
Displaying a Configuration Menu 4-2
Unlocking and Locking Options 4-3
Editing Values 4-4
Overview of Options Configurable from a Phone 4-4
Network Configuration Menu 4-6
Understanding DHCPv6 and Autoconfiguation 4-16
Device Configuration Menu 4-17
CallManager Configuration Menu 4-18
SIP Configuration Menu (SIP Phones Only) 4-19
SIP General Configuration Menu 4-19
Line Settings Menu (SIP Phones Only) 4-21
Call Preferences Menu (SIP Phones Only) 4-22
HTTP Configuration Menu 4-23
Locale Configuration Menu 4-24
NTP Configuration Menu (SIP Phones Only) 4-24
UI Configuration Menu 4-25
Media Configuration Menu 4-26
Power Save Configuration Menu 4-29
Ethernet Configuration Menu 4-29
Security Configuration Menu 4-30
QoS Configuration Menu 4-31
Network Configuration Menu 4-32
Security Configuration Menu 4-35
CTL File Submenu 4-36
ITL File Submenu 4-37
Trust List Menu 4-39
802.1X Authentication and Status 4-40