Cisco 7931G - Set Up Abbreviated Dialing Codes; Phone Service Setup on Web

4-20
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-2
• Device Configuration Menu, page 4-17
Phone Label Displays the text that is displayed on the top
right status line of the LCD on the phone. This
text is for end-user display only and has no effect
on caller identification or messaging. This value
will always be set to null.
Display only—cannot configure.
Enable VAD This value is set to No by default. From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
Start Media Port Displays the start Real-Time Transport Protocol
(RTP) range for media.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
End Media Port Displays the end Real-Time Transport Protocol
(RTP) range for media.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
NAT Enabled Displays if Network Address Translation (NAT)
is enabled. This value will always be set to false.
Display only—cannot configure.
NAT Address Displays the WAN IP address of the NAT or
firewall server. This value will always be set to
null.
Display only—cannot configure.
Call Statistics This value is set to No by default. From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
Table 4-8 SIP General Configuration Menu Options (continued)
Option Description To Change