Cisco Catalyst 3750 - Page 23

Contents
xxiii
Catalyst 3750 Metro Switch Software Configuration Guide
78-15870-01
Routing Assistance When IP Routing is Disabled 28-10
Proxy ARP 28-10
Default Gateway 28-10
ICMP Router Discovery Protocol (IRDP) 28-11
Configuring Broadcast Packet Handling 28-12
Enabling Directed Broadcast-to-Physical Broadcast Translation 28-13
Forwarding UDP Broadcast Packets and Protocols 28-14
Establishing an IP Broadcast Address 28-15
Flooding IP Broadcasts 28-15
Monitoring and Maintaining IP Addressing 28-16
Enabling IP Unicast Routing 28-17
Configuring RIP 28-18
Default RIP Configuration 28-18
Configuring Basic RIP Parameters 28-19
Configuring RIP Authentication 28-21
Configuring Summary Addresses and Split Horizon 28-21
Configuring IGRP 28-23
Default IGRP Configuration 28-24
Understanding Load Balancing and Traffic Distribution Control 28-24
Configuring Basic IGRP Parameters 28-25
Configuring Split Horizon 28-27
Configuring OSPF 28-28
Default OSPF Configuration 28-29
Configuring Basic OSPF Parameters 28-30
Configuring OSPF Interfaces 28-31
Configuring OSPF Area Parameters 28-32
Configuring Other OSPF Parameters 28-33
Changing LSA Group Pacing 28-35
Configuring a Loopback Interface 28-35
Monitoring OSPF 28-36
Configuring EIGRP 28-37
Default EIGRP Configuration 28-38
Configuring Basic EIGRP Parameters 28-39
Configuring EIGRP Interfaces 28-40
Configuring EIGRP Route Authentication 28-41
Monitoring and Maintaining EIGRP 28-42