Cisco Catalyst 3750 - Page 24

Contents
xxiv
Catalyst 3750 Metro Switch Software Configuration Guide
78-15870-01
Configuring BGP 28-43
Default BGP Configuration 28-45
Enabling BGP Routing 28-47
Managing Routing Policy Changes 28-49
Configuring BGP Decision Attributes 28-50
Configuring BGP Filtering with Route Maps 28-52
Configuring BGP Filtering by Neighbor 28-53
Configuring Prefix Lists for BGP Filtering 28-54
Configuring BGP Community Filtering 28-55
Configuring BGP Neighbors and Peer Groups 28-56
Configuring Aggregate Addresses 28-58
Configuring Routing Domain Confederations 28-59
Configuring BGP Route Reflectors 28-60
Configuring Route Dampening 28-61
Monitoring and Maintaining BGP 28-62
Configuring ISO CLNS Routing 28-63
Configuring ISO IGRP Dynamic Routing 28-63
Default ISO IGRP Configuration 28-64
Enabling ISO IGRP 28-64
Configuring Optional ISO IGRP Parameters 28-65
Configuring IS-IS Dynamic Routing 28-66
Default IS-IS Configuration 28-67
Enabling IS-IS Routing 28-68
Configuring IS-IS Global Parameters 28-70
Configuring IS-IS Interface Parameters 28-72
Monitoring and Maintaining ISO IGRP and IS-IS 28-74
Configuring Multi-VRF CE 28-76
Understanding Multi-VRF CE 28-76
Default Multi-VRF CE Configuration 28-78
Multi-VRF CE Configuration Guidelines 28-79
Configuring VRFs 28-80
Configuring a VPN Routing Session 28-80
Configuring BGP PE to CE Routing Sessions 28-81
Multi-VRF CE Configuration Example 28-82
Displaying Multi-VRF CE Status 28-86
Configuring Protocol-Independent Features 28-86
Configuring Cisco Express Forwarding 28-86
Configuring the Number of Equal-Cost Routing Paths 28-87
Configuring Static Unicast Routes 28-88