Contents
xxvi
Catalyst 3750 Metro Switch Software Configuration Guide
78-15870-01
Understanding EoMPLS 30-12
Interaction with Other Features 30-13
EoMPLS and 802.1Q Tunneling 30-13
EoMPLS and Layer 2 Tunneling 30-14
EoMPLS and QoS 30-14
EoMPLS Limitations 30-14
Enabling EoMPLS 30-15
Default EoMPLS Configuration 30-15
EoMPLS Configuration Guidelines 30-15
Configuring EoMPLS 30-16
Packet Flow in an EoMPLS Network 30-17
Configuring MPLS and EoMPLS QoS 30-18
Understanding MPLS QoS 30-18
Enabling MPLS and EoMPLS QoS 30-20
Default MPLS and EoMPLS QoS Configuration 30-20
Setting the Priority of Packets with Experimental Bits 30-20
Monitoring and Maintaining MPLS and EoMPLS 30-22
CHAPTER
31 Configuring IP Multicast Routing 31-1
Understanding Cisco’s Implementation of IP Multicast Routing 31-2
Understanding IGMP 31-2
IGMP Version 1 31-3
IGMP Version 2 31-3
Understanding PIM 31-3
PIM Versions 31-4
PIM Modes 31-4
Auto-RP 31-5
Bootstrap Router 31-5
Multicast Forwarding and Reverse Path Check 31-6
Understanding DVMRP 31-7
Understanding CGMP 31-7
Configuring IP Multicast Routing 31-8
Default Multicast Routing Configuration 31-8
Multicast Routing Configuration Guidelines 31-8
PIMv1 and PIMv2 Interoperability 31-9
Auto-RP and BSR Configuration Guidelines 31-9
Configuring Basic Multicast Routing 31-10
To Next Page
Loading...
