Cisco Catalyst 3750 - Page 27

Contents
xxvii
Catalyst 3750 Metro Switch Software Configuration Guide
78-15870-01
Configuring a Rendezvous Point 31-11
Manually Assigning an RP to Multicast Groups 31-12
Configuring Auto-RP 31-13
Configuring PIMv2 BSR 31-17
Using Auto-RP and a BSR 31-21
Monitoring the RP Mapping Information 31-22
Troubleshooting PIMv1 and PIMv2 Interoperability Problems 31-22
Configuring Advanced PIM Features 31-22
Understanding PIM Shared Tree and Source Tree 31-22
Delaying the Use of PIM Shortest-Path Tree 31-24
Modifying the PIM Router-Query Message Interval 31-25
Configuring Optional IGMP Features 31-26
Default IGMP Configuration 31-26
Configuring the Switch as a Member of a Group 31-26
Controlling Access to IP Multicast Groups 31-27
Changing the IGMP Version 31-28
Modifying the IGMP Host-Query Message Interval 31-29
Changing the IGMP Query Timeout for IGMPv2 31-30
Changing the Maximum Query Response Time for IGMPv2 31-30
Configuring the Switch as a Statically Connected Member 31-31
Configuring Optional Multicast Routing Features 31-31
Enabling CGMP Server Support 31-32
Configuring sdr Listener Support 31-33
Enabling sdr Listener Support 31-33
Limiting How Long an sdr Cache Entry Exists 31-34
Configuring an IP Multicast Boundary 31-34
Configuring Basic DVMRP Interoperability Features 31-36
Configuring DVMRP Interoperability 31-36
Configuring a DVMRP Tunnel 31-38
Advertising Network 0.0.0.0 to DVMRP Neighbors 31-40
Responding to mrinfo Requests 31-41
Configuring Advanced DVMRP Interoperability Features 31-41
Enabling DVMRP Unicast Routing 31-42
Rejecting a DVMRP Nonpruning Neighbor 31-43
Controlling Route Exchanges 31-45
Limiting the Number of DVMRP Routes Advertised 31-45
Changing the DVMRP Route Threshold 31-45
Configuring a DVMRP Summary Address 31-46
Disabling DVMRP Autosummarization 31-48