Contents
xxviii
Catalyst 3750 Metro Switch Software Configuration Guide
78-15870-01
Adding a Metric Offset to the DVMRP Route 31-48
Monitoring and Maintaining IP Multicast Routing 31-49
Clearing Caches, Tables, and Databases 31-49
Displaying System and Network Statistics 31-50
Monitoring IP Multicast Routing 31-51
CHAPTER
32 Configuring MSDP 32-1
Understanding MSDP 32-1
MSDP Operation 32-2
MSDP Benefits 32-3
Configuring MSDP 32-4
Default MSDP Configuration 32-4
Configuring a Default MSDP Peer 32-4
Caching Source-Active State 32-6
Requesting Source Information from an MSDP Peer 32-8
Controlling Source Information that Your Switch Originates 32-8
Redistributing Sources 32-9
Filtering Source-Active Request Messages 32-11
Controlling Source Information that Your Switch Forwards 32-12
Using a Filter 32-12
Using TTL to Limit the Multicast Data Sent in SA Messages 32-14
Controlling Source Information that Your Switch Receives 32-14
Configuring an MSDP Mesh Group 32-16
Shutting Down an MSDP Peer 32-16
Including a Bordering PIM Dense-Mode Region in MSDP 32-17
Configuring an Originating Address other than the RP Address 32-18
Monitoring and Maintaining MSDP 32-19
CHAPTER
33 Configuring Fallback Bridging 33-1
Understanding Fallback Bridging 33-1
Configuring Fallback Bridging 33-2
Default Fallback Bridging Configuration 33-3
Fallback Bridging Configuration Guidelines 33-3
Creating a Bridge Group 33-3
To Next Page
