EasyManuals Logo
Home>Cisco>Firewall>RV110W

Cisco RV110W Administration Guide

Cisco RV110W
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
Configuring Networking
Configuring IPv6
Cisco RV110W Administration Guide 51
2
STEP 3 Click Save.
Configuring IPv6 Address Pools
You can define the IPv6 delegation prefix for a range of IPv6 addresses to be
served by the Cisco RV110W DHCPv6 server.
Using a delegation prefix, you can automate the process of informing other
networking equipment on the LAN of DHCP information specific for the assigned
prefix.
To configure IPv6 Address Pools:
STEP 1 Choose Networking > IPv6 > IPv6 LAN Configuration.
STEP 2 In the IPv6 Address Pools Table, click Add Row.
Server Preference Enter the server preference level of this DHCP
server.
DHCP advertise messages with the highest server
preference value to a LAN host are preferred over
other DHCP server advertise messages.
The default is 255.
Static DNS 1 Enter the IPv6 address of the primary DNS server
on the ISP IPv6 network.
Static DNS 2 Enter the IPv6 address of the secondary DNS
server on the ISP IPv6 network.
Client Lease Time Enter the client lease time.
Enter the duration (in seconds) for which IPv6
addresses are leased to endpoints on the LAN.

Table of Contents

Other manuals for Cisco RV110W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV110W and is the answer not in the manual?

Cisco RV110W Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity10
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity13 channels
Top Wi-Fi standardWi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports4
Input voltage12 V
Rack mountingNo
Number of users32 user(s)
Weight (imperial)0.61 lbs
Dimensions (WxDxH)150 x 150 x 30 mm
Operating temperature (T-T)32 - 104 °F
Compliance industry standardsIEEE 802.3, IEEE 802.3u
Supported data transfer rates10/100Mbps
Dimensions (W x D x H) (imperial)5.91 x 5.91 x 1.18 \
WLAN data transfer rates supported11, 54 Mbit/s
Supported network protocolsPPPoE, DHCP, PPTP, L2TP, IGMP, RSTP
Antennas quantity2
Antenna gain level (max)1.8 dBi
Firewall securityVPN
Security algorithmsWEP, WPA, WPA2, WPS
MAC address filtering-
Product colorBlack
CertificationFCC, CE, IC, cUL, Wi-Fi
Storage temperature (T-T)-20 - 70 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Width150 mm
Height30 mm
Weight300 g

Related product manuals