Cisco RV120W - Page 105

Configuring Virtual Private Networks (VPNs) and Security
Configuring Advanced VPN Parameters
Cisco RV120W Administration Guide 96
5
STEP 6 If you chose FQDN, User-FQDN, or DER ASN1 DN as the identifier type, enter the IP
address or domain name in the Identifier field.
STEP 7 In the Remote section, under Identifier Type, choose the ISAKMP identifier for this
router:
• Remote WAN (Internet) IP
• FQDN
• User FQDN
• DER ASN1 DN
STEP 8 If you chose FQDN, User-FQDN, or DER ASN1 DN as the identifier type, enter the IP
address or domain name in the Identifier field.
IKE SA Parameters
The Security Association (SA) parameters define the strength and mode for
negotiating the SA.
STEP 1 Choose the encryption algorithm, or the algorithm used to negotiate the SA:
• DES
• 3DES
• AES-128
• AES-192
• AES-256
STEP 2 Specify the authentication algorithm for the VPN header:
• MD5
• SHA-1
• SHA2-256
• SHA2-384
• SHA2-512