Cisco WS-C2950-24 - Page 107

4-11
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-05
Chapter 4 General Switch Administration
Default Settings
Address Resolution
Protocol (ARP)
Enabled “Managing the ARP Table” section
on page 6-45.
Documentation set for Cisco IOS
Release 12.0 on Cisco.com.
Cluster Manager
System > ARP Table
System Time
Management
None “Setting the System Date and Time”
section on page 6-17.
Documentation set for Cisco IOS
Release 12.0 on Cisco.com.
Cluster Manager
Cluster > System Time
Management
Static address
assignment
None
assigned
“Adding Static Addresses” section on
page 6-59.
Documentation set for Cisco IOS
Release 12.0 on Cisco.com.
Cluster Manager
Security > Address
Management
Dynamic address
management
Enabled “Managing the MAC Address
Tables” section on page 6-56.
Documentation set for Cisco IOS
Release 12.0 on Cisco.com.
Cluster Manager
Security > Address
Management
Voice configuration – “Configuring Voice Ports” section on
page 7-17.
–
VLAN membership Static-
access
ports in
VLAN 1
“Assigning VLAN Port Membership
Modes” section on page 8-7.
Cluster Manager
VLAN > VLAN
Membership
VMPS Configuration – “How the VMPS Works” section on
page 8-52.
Cluster Manager
Cluster > VMPS
Configuration
VTP Management VTP
server
mode
“Configuring VTP” section on
page 8-20.
Cluster Manager
VLAN > VTP
Management
Table 4-2 Default Settings and Where To Change Them (continued)
Feature
Default
Setting Concepts and CLI Procedures CMS Option