Control Station Duetto Setup guide
2.0/0518 17
Send the configuration to the Intercom Server
The configuration of the IP stations has to be sent to the Intercom Server. It is possible to send either
the configuration of all stations, only of modified stations or of all stations selected in the table to the
Intercom Server.
Configuration IP Station Config
In the dropdown list next to the button Write Settings, select one of the following upload options:
all: The entire configuration will be sent.
modified: The configuration will be sent only to modified subscribers.
selected: The configuration will be sent only to the selected subscribers.
Click on the button Write settings to send the configuration to the respective IP subscribers.
Export the configuration to the computer
It is possible to save the configuration of the IP Station Config on the connected computer. The
exported configuration file can be saved in several data types.
Configuration IP Station Config
Menu Station > Export Settings
Select the data type of the exported configuration file in the submenu:
to EXCEL: Save as XLS file.
to HTML: Save as HTML file.
to TXT: Save as TXT file.
To Next Page
Loading...
