Control Station Duetto Program interface
2.0/0518 121
Privacy function
With an activated privacy function, incoming calls have to be answered by acknowledging them on the
display or by lifting the handset (if connected).
Configuration DUETTO
Open the call app (see page 104).
Activation: Via the keypad, enter the code “031”. The activation of the privacy mode will be con-
firmed by an audible signal.
Deactivation: Via the keypad, enter the code “030”.
All Call s and group calls
In case of an All Call, an announcement is made on each Intercom station. After the announcement,
each subscriber can answer this call within a certain time.
In case of a group call, the announcement is only made within a configured group of Intercom stations.
In this case, only the participating subscribers can answer this announcement.
User interface “home screen”
ATTENTION: Privacy function state will not shown
It will not be shown whether or not the privacy function is deactivated on the DUETTO de-
vice!
NOTE: Further information
Further information about the configuration of the privacy function can be found in the manual
“Intercom Server Configuration”.
NOTE: Further information
Further information about the configuration of All Calls and group calls can be found in the manual
“Intercom Server Configuration”.
To Next Page
Loading...