Program interface Control Station Duetto
96 2.0/0518
Volume control
User interface “home screen”
Tap on the loudspeaker button 1 on the status bar in order to open the audio setting screen. By
default, the audio setting screen for the telephone mode of the DUETTO device will be displayed (
see
below).
Mode “Telephone”
User interface “volume settings for telephone mode”
Mode 2: Tap on the desired button to open the audio setting screen for the respective mode. The
following modes are available:
General: General audio settings of the DUETTO device (see page 97).
Phone: Audio settings for the DUETTO device in SIP mode.
Intercom: Audio settings for the DUETTO device in Intercom mode (see page 98).
DND mode (Do Not Disturb) 3: Tap on the button to mute the DUETTO device in SIP mode. All in-
coming calls are rejected automatically and the caller hears a busy tone, while no caller information
is displayed on the DUETTO display or in the call history.
4 Shows the current audio level of the respective audio source (0 – 11).
NOTE: Switch Intercom/SIP mode
Further information about switching between Intercom and SIP mode can be found on page 95.
NOTE: Selected button is highlighted in blue
The button of the selected device mode is highlighted in blue.
NOTE: Button is indicated orange in “Do Not Disturb” mode
When the DND mode is activated, the button is indicated in orange.
To Next Page
Loading...
