Control Station Duetto Web interface – Network
2.0/0518 31
Listening address: In the field of the desired priority level, enter the multicast IPv4 address
and port (divided by a colon) through which the multicast will be received (these parameters
must match the respective multicast sender).
Label: In the field of the desired priority level, enter the desired label shown on the display of
the DUETTO when the respective multicast is delivered (i.e. this multicast is not faded out).
Call priority: The priority for incoming broadcasts can be defined by drag and drop.
➥ Click on the button Save to save the settings.
Outgoing broadcast
In order to configure the DUETTO device as multicast sender, see ”Logic rules configuration” on
page 68.
To Next Page
Loading...
