Datalogic Gryphon 2D Series Product Reference Guide

Reading Parameters Enter/Exit Programming Mode
Product Reference Guide 111
Good Read Beep Type
Specifies whether the good read beep has a mono or bitonal beep sound.
Good Read Beep Frequency
Adjusts the good read beep to sound at a selectable low, medium or high fre-
quency, selectable from the list below. (Controls the speaker’s pitch/tone.)
$CBPTY00
Good Read Beep Type = Mono
$CBPTY01
Good Read Beep Type = Bitonal
DEFAULT
$CBPFR00
Good Read Beep Frequency = Low
$CBPFR01
Good Read Beep Frequency = Medium
$CBPFR02
Good Read Beep Frequency = High
DEFAULT

Datalogic Gryphon 2D Series Specifications

General

Brand	Datalogic
Model	Gryphon 2D Series
Category	Barcode Reader
Language	English