Datalogic Gryphon 2D Series Product Reference Guide

Enter/Exit Programming Mode Other BT Features
264 Gryphon™ I GD/GBT/GM4500
Other BT Features
Bluetooth HID Variable PIN Code
Specifies the selection available for Static or Variable Pin Code, when Bluetooth
HID profile is configured.
Some Bluetooth drivers on the Host (such as WIDCOMM and BlueSoleil 8)
re
quire a Variable PIN Code. When attempting connection, the application pres-
ents a window that includes a PIN Code which is to be input using the Gryphon
GBT4
400. Scan the bar code "Variable PIN Code" below, then use the host com-
puter’s Bluetooth manager to “Discover new devices” and select "Datalogic
Sca
nner." Use a text editor to see incoming data on the port designated by the
computer's Bluetooth manager.
NOTE
If you receive an error message, it may be
necessary to disable secu-
rity on the device.
When you hear the beep and see the Green LED blinking indicating the reader is
waiting for an alphanumeric entry, enter the required variable PIN Code by
scanning the corresponding bar codes in
Appendix D, Keypad for alphanumeric
entry. Finish by scanning the Exit HID Variable PIN Code label.
Set Static Pin Code
DEFAULT
DEFAULT
Set Variable Pin code
CANCEL
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
Exit HID Variable PIN Code

Datalogic Gryphon 2D Series Specifications

General

Brand	Datalogic
Model	Gryphon 2D Series
Category	Barcode Reader
Language	English