Datalogic Gryphon 2D Series - Gs1-128; GS1-128 Enable

Enter/Exit Programming Mode GS1-128
168 Gryphon™ I GD/GBT/GM4500
GS1-128
The following options apply to the GS1-128 symbology. (Also known as USS-
128, GTIN-128, UCC-128.)
GS1-128 Enable
This option enables/disables the ability of the scanner to translate GS1-128
labels to the GS1-128 data format. Options are:
• Transmit GS1-128 labels in Code 128 data format.
• Transmit GS1-128 labels in GS1-128 data format.
• Do not transmit GS1-128 labels.
GS1-128 = Transmit in Code 128 data format
GS1-128 = Transmit in GS1-128 data format
DEFAULT
GS1-128 = Do not transmit GS1-128 labels
GS1-128 2D Component
This feature enables/disables a requirement that a 2D label component be
decoded when a base label of this symbology is decoded.
DEFAULT
GS1-128 2D Component = Disable
GS1-128 2D Component = Enable
$CU8EN00
$CU8EN01
$CU8EN02