Enter/Exit Programming Mode
246 Gryphon™ I GD/GBT/GM4500
Motion Features
Use this chapter to configure motion settings for the handheld.
Reference
Appendix B, for a listing of standard factory
settings.
Motion Aiming Control
Configures the ability of the scanner to Enable/Disable the Aiming system when
motion is detected.
Motion Aiming Control = Disable
Motion Aiming Control = Enable
Motion Sensitivity
Defines discrete set of levels for scanner motion sensitivity when in handheld use.
Motion Sensitivity = Low
Motion Sensitivity = Medium
Motion Sensitivity = High
MOTION AIMING CONTROL on page 231
MOTION SENSITIVITY on page 232
MOTIONLESS TIMEOUT on page 233
To Next Page
Loading...
Need help?
General
