Datalogic Gryphon 2D Series Product Reference Guide

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 143
EAN 8
The following options apply to the EAN 8 (Jan 8) symbology.
EAN 8 Enable/Disable
When disabled, the scanner will not read EAN 8/JAN 8 bar codes.
EAN 8 = Disable
EAN 8 = Enable
DEFAULT
EAN 8 Check Character Transmission
Enable this option to transmit the check character along with EAN 8 bar code
data.
EAN 8 Check Character Transmission = Don’t Send
EAN 8 Check Character Transmission = Send
DEFAULT
$C8BEN00
$C8BEN01
$C8BCT00
$C8BCT01

Datalogic Gryphon 2D Series Specifications

General

Brand	Datalogic
Model	Gryphon 2D Series
Category	Barcode Reader
Language	English