Enter/Exit Programming Mode Add-Ons
146 Gryphon™ I GD/GBT/GM4500
Add-Ons
The following features apply to optional add-ons.
NOTE
Contact Customer Support for advanced program
ming of optional and con-
ditional add-ons.
Optional Add-ons
The scanner can be enabled to optionally read the following add-ons (supple-
mentals):
•P2
•P5
NOTE
DEFAULT
Optional Add-Ons = Disable P2
Optional Add-Ons = Enable P2
DEFAULT
Optional Add-Ons = Disable P5
Optional Add-Ons = Enable P5
If a UPC/EAN base label and a an add-on are both decoded, the scanner will
transmit the base label and add-on. If a UPC/EAN base label is decoded
without an add-on, the base label will be transmitted without an add-on.
Conditional add-on settings (if enabled) are considered by the scanner
before optional add-on settings.
$CADO200
$CADO201
$CADO500
$CADO501
To Next Page
Loading...
Need help?
General
