Product Reference Guide 45
RS-232/USB-COM Interfaces
The programming bar codes in this chapter allow modifications to the standard
RS-232 and USB-Com interfaces.
STANDARD FACTORY SETTINGS on page 45
INTERCHARACTER DELAY on page 46
BEEP ON ASCII BEL on page 47
BEEP ON NOT ON FILE on page 47
ACK NAK OPTIONS on page 48
ACK CHARACTER on page 49
NAK CHARACTER on page 49
ACK NAK TIMEOUT VALUE on page 50
ACK NAK RETRY COUNT on page 51
ACK NAK ERROR HANDLING on page 52
INDICATE TRANSMISSION FAILURE on page 53
DISABLE CHARACTER on page 53
ENABLE CHARACTER on page 54
Standard Factory Settings
Reference Appendix B, for a listing of standard factory settings.
To Next Page
Loading...
Need help?
General
