Datalogic Gryphon 2D Series - Aztec Code; Aztec Code Enable; Disable; Aztec Code Length Control; Symbology Selection

Enter/Exit Programming Mode Aztec Code
218 Gryphon™ I GD/GBT/GM4500
Symbology Selection
Aztec Code
Aztec Code Enable / Disable
Enables/disables the ability of the reader to decode Aztec Code labels.
DEFAULT
Aztec Code = Disable
Aztec Code = Enable
Aztec Code Length Control
This feature specifies either variable length decoding or fixed length decoding
for this symbology.
Variable Length: For variable length decoding, a minimum and maximum length
may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
DEFAULT
Aztec Code Length Control = Variable Length
Aztec Code Length Control = Fixed Length