Enter/Exit Programming Mode Interleaved 2 of 5 CIP HR
174 Gryphon™ I GD/GBT/GM4500
Interleaved 2 of 5 CIP HR
The following options apply to the Interleaved 2 of 5 CIP HR symbology.
Interleaved 2 of 5 CIP HR Enable/Disable
Enables/Disables ability of scanner to decode Interleaved 2 of 5 CIP HR labels.
DEFAULT
Interleaved 2 of 5 CIP HR = Disable
Interleaved 2 of 5 CIP HR = Enable
Datalogic 2 of 5
The following options apply to the Datalogic 2 of 5 symbology.
Datalogic 2 of 5 Enable/Disable
When disabled, the scanner will not read Datalogic 2 of 5 bar codes.
DEFAULT
Datalogic 2 of 5 = Disable
Datalogic 2 of 5 = Enable
$CCHEN00
$CCHEN01
$CD2EN00
$CD2EN01
To Next Page
Loading...
Need help?
General
