INTRODUCTION on page 87
STANDARD FACTORY SETTINGS on page 87
USB-OEM DEVICE USAGE on page 88
USB-OEM INTERFACE OPTIONS on page 88
Product Reference Guide 87
USB-OEM Interface
Introduction
Feature settings for USB interfaces differ depending upon which host type the
scanner will be connected with. Use the feature settings in this chapter to spe-
cifically configure for the USB-OEM interface. Other USB interfaces are included
i
n the appropriate chapter for their host type.
Standard Factory Settings
Reference Appendix B, for a listing of standard factory settings.
To Next Page
Loading...
Need help?
General
