Setup
14 Gryphon™ I GD/GBT/GM4500
Positioning the Base Station
The base station/charger may be set up in desk application to hold the reader
in three different positions, either a horizontal or standing or vertical position,
in order to provide the most comfortable use depending on the needs.
Base Station Positions and related clips to be used
Figure 6 - Horizontal Position
This position is preferred, unless a different specific positioning is required, for
its outmost ease of insertion as well as the minimum effort and attention
required to customer when docking the scanner.
Figure 7 - Presentation Position
This position is preferred if the scanner is to be used in stand mode and not
needed to be often removed from base station.
To Next Page
Loading...
Need help?
General
