To Next Page

To Previous Page

Wireless Features Enter/Exit Programming Mode

Product Reference Guide 263

BT PIN Code

After enabling Security Mode (see "BT Security Mode" on page 262), specify

whether you want to set a 4-digit or a 16-digit PIN Code.

See page 301 for

detailed information and examples for setting this feature.

Select 4-character BT PIN Code

DEFAULT

Select 16-character BT PIN Code

Select PIN Code Length

Set PIN Code

Determine the desired characters for the PIN code, then convert to hexadecimal

using the ASCII Chart on the inside back cover of this manual. See page 301 for

detailed information and examples for setting this feature.

Set 4-character BT PIN Code

To configure this feature, scan the ENTER/EXIT PROGRAM-

MING MODE bar code above, then the bar code at left fol-

lowed by the digits from the Al

phanumeric characters in

Appendix D, Keypad

representing your desired charac-

ter(s). End by scanning the ENTER/EXIT bar code again.

Set 16-character BT PIN Code

CANCEL

Make a mistake? Scan the CANCEL bar code to abort and

not save

the entry string. You can then start again at the

beginning.

DEFAULT

31323334 = Default PIN Code is 1234

Datalogic Gryphon 2D Series Product Reference Guide

Other manuals for Datalogic Gryphon 2D Series