Battery Profiles Enter/Exit Programming Mode
Product Reference Guide 245
Battery Profiles
Gryphon GBT/GM45 provides the user the ability to select different usage pro-
files to better configure the reader with respect to specific ne
eds. By default,
the Maximum Performances profile is selected and provides high snappiness
and max reading capability. The user can then decide to exploit specific fea-
tures when others are considered less im
portant, for instance: fast battery
recharge instead of battery health, maximum reading performances instead of
battery autonomy, etc.
Here below different Battery Profiles are described with as
sociated benefits and
limitations:
Maximum Performances (default)
• Scanner autonomy for heavy workload (80.000
scans for more than 22h
a
)
a. 1 read per second, continuous reading with no idle status
•Motionix
TM
enabled
• Max radio communication performances
Maximum Battery Health
• Battery capacity is preserved
b
b. after 300 full charge cycles at room temperature 25° C (77° F), more than 80% of the orig-
inal capacity is still available
• Reduced max charging current
• Reduced battery capacity by ~20%
• Increased recharge time: +20% on average (it
depends on the specific scanner configuration)
Maximum Autonomy
• Max scanner autonomy (approx. 83h
c
)
c. 10 reads in 10 seconds and 50 seconds idle
•Motionix
TM
disabled
• Vibro motor disabled
• Reduced Radio Star
TM
responsiveness
d
d. host commands from cradle will not be received, asynchronous data from cradle will not
be received, out-of-range signaling will not work, configuration exchange will not be exe-
cuted automatically (only after trigger pressure)
• Increased Sniff-time period
e
e. barcode reading shall be less snappy, execution of commands received from base shall be
delayed until gun is ready
(Bluetooth
TM
)
Fast Charge
• Reduced recharge time (approx. 20%)
•Motionix
TM
disabled
• Vibro motor disabled
• Scan-While-Charging disabled (Trigger Single)
To Next Page
Loading...
Need help?
General
