Wireless Features Enter/Exit Programming Mode
Product Reference Guide 255
Configuration Updates
See page 259 in “References” for detailed information and examples of these
features.
Automatic Configuration Update
When this feature is enabled, a reader and its linked Base Station can automati-
cally ensure they stay in sync with rega
rd to application hardware and/or con-
figuration. See
page 259 for more information
on this feature.
Automatic Configuration Update = Disable
Automatic Configuration Update = Enable
Copy Configuration to Scanner
Scan the following label to copy the current Base Station configuration to the
scanner. Use this method when the Auto Configuration Update feature is dis-
abled and you want a one-time configuration
update to be performed on the
scanner.
NOTE
Copy Configuration to Scanner
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
To Next Page
Loading...
Need help?
General
