To Next Page

To Previous Page

1D Symbologies Enter/Exit Programming Mode

Product Reference Guide 163

Code 128

The following options apply to the Code 128 symbology.

Code 128 Enable/Disable

When disabled, the scanner will not read Code 128 bar codes.

Code 128 = Disable

Code 128 = Enable

DEFAULT

Expand Code 128 to Code 39

This feature enables/disables expansion of Code 128 labels to Code 39 labels.

When enabled, the label identifier for a Code 128 label shall be set to Code 39

and all Code 39 formatting control shall be applied to the label.

DEFAULT

Code 128 to Code 39 = Don’t Expand

Code 128 to Code 39 = Expand

$CC8EN00

$CC8EN01

$CC8C300

$CC8C301

Datalogic Gryphon 2D Series Product Reference Guide

Other manuals for Datalogic Gryphon 2D Series