Symbology Selection Enter/Exit Programming Mode
Product Reference Guide 235
Micro PDF417 Set Length 2
This feature specifies one of the bar code lengths for Micro PDF417 Length
Control on page 234
. Length 2 is the maximum label length if in Variable
Length Mode, or the second fixed length if in Fi
xed Length includes the bar
code’s data characters only. Characters can be set from 0001 to 0366 charac-
ters (pad with zeroes) in increments of 01. Any value greater than 0366 will be
c
onsidered to be 0366.
See
page 303 for detailed instructions on setting this feature.
Select Micro PDF417 Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left follow
ed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save
the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
Length 2 is 0366 Characters
To Next Page
Loading...
Need help?
General
