Enter/Exit Programming Mode QR Code
238 Gryphon™ I GD/GBT/GM4500
QR Code
Set Length 2
This feature specifies one of the bar code lengths for QR Code Length Control
on page 236
. Length 2 is the maximum label length if in Variable Length Mode,
or the second fixed length if in Fixed Len
gth Mode. Characters can be set from
0001 to 7,089 characters in increments of 0001 (pad with zeroes).
See
page 303 for detailed instructions on setting this feature.
Select QR Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left follow
ed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save
the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
Length 2 is 7,089 Characters
To Next Page
Loading...
Need help?
General
