Datalogic QuickScan Lite QW2400 User Manual

Enter/Exit Programming Mode Aztec Code
206 QuickScan™ Lite QW2400
Aztec Code Set Length 2
This feature specifies one of the bar code lengths for Aztec Code Length Con-
trol on page 204. Length 2 is the maximum label length if in Variable Length
Mode, or the second fixed length
if in Fixed Length Mode. Characters can be set
from 0001 to 3,832 characters in increments of 0001 (pad with zeroes).
See page 259 for detailed instructions on setting this feature.
Select Aztec Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followe
d by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/E
XIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save
the entry string. You can then start again at the
beginning.
CANCEL
$CAZL2
~
Length 2 is 3,832 Characters
DEFAULT

Datalogic QuickScan Lite QW2400 Specifications

General

Brand	Datalogic
Model	QuickScan Lite QW2400
Category	Barcode Reader
Language	English