Installation Problems
140
5. Troubleshooting
F
The driver installation begins. Proceed with the installation by following the displayed information.
G
Follow the on-screen instructions to proceed with the installation.
H
When the following window is displayed, click [Install].
I
When the installation nishes, remove the DGSHAPE Software Package CD.
J
Turn on the power to the machine.
K
Connect the machine to the computer using the USB cable.
¾ If connecting more than one unit of this machine to a single computer, see the "Setup Guide" ("Connecting Multiple
Units")�
¾ Use the included USB cable�
¾ Do not use a USB hub� Connection may not be possible�
¾ Secure the USB cable with a cable clamp�
Cable clamp
The driver will be installed automatically.
To Next Page
Loading...
