Care of the Regulator Bowl
If the inside of the bowl becomes dirty, remove and wash the bowl�
WARNING
Be sure to bleed o the air pressure before removing the regulator bowl.
Failure to do so may result in a rupture or components ying o.
WARNING
Before removing or attaching the regulator and before performing maintenance, make sure that the
bowl is securely attached.
If the bowl is not properly attached, it may come ying o when compressed air is supplied.
WARNING
Clean the regulator bowl using a neutral detergent. Never use solvents such as gasoline, alcohol,
or thinner.
Using solvents may degrade the bowl and may result in a rupture.
Procedure
A
Stop the supply of compressed air.
B
Make sure that the pressure gauge reads "0."
C
Remove the regulator.
Loosen the screws indicated in the gure.
Periodic Care and Maintenance
68
3. Maintenance
To Next Page
Loading...
