Responding to Error Messages
165
5. Troubleshooting
"1038-0000" Milling data error. No milling bur is selected.
Level 2
Situation/Error Cause
• There is a problem with the milling data�
Procedure
A
Hold down the operation button on the built-in panel.
This will clear the error.
B
Check the milling data.
If necessary check the CAM settings and the shape in the CAD data.
"103A-000*" DANGER!! The coolant is leaking!!
Level 3
Situation/Error Cause
• Fluid is leaking inside the machine�
Procedure
A
Turn o the power.
B
Unplug the power cable.
Contact your authorized Roland DG Corporation dealer.
To Next Page
Loading...