Spindle Run-In (Long)
Situations Requiring This Work
• When the machine has not been used for 1 month or longer
• When the machine is moved
• When a spindle error (1029-0000, 102A-000*, or 102B-0000) occurs
Performing Run-In
Procedure
A
Remove the workpiece, rotary axis correction jig, and ATC magazine correction jig if they are attached.
B
Close the front cover.
C
Show VPanel.
"
D
Select the machine to operate.
E
Click .
MEMO
If the display in the [MAINTENANCE] area in VPanel is as shown below, click � Clicking this icon displays the same window as
clicking [Spindle run-in (long)] in step
F
� Proceed directly to step
G
�
Extended Periods of Non-Use / Moving the Machine
95
3. Maintenance
To Next Page
Loading...
