DGSHAPE DWX-42W - Using the [Emergency Release] Button

VPanel Basic Operation
8
1. Basic Operation
Using the [Emergency release] Button
If the initial operations cannot be performed because of a problem such as the milling bur caught on the workpiece, you can use
the [Emergency release] button to remove the milling bur from the spindle unit�
Procedure
A
Turn o󰀨 the power.
" 󱐯
B
Open the front cover.
C
Turn on the power.
" 
D
Show VPanel.
" 
E
Click the [Maintenance] tab, and then click [Emergency release].