DGSHAPE DWX-42W - Switching the Machine to Register in Vpanel

Operation When Multiple Machines are Registered in VPanel
119
4. Useful Functions
Switching the Machine to Register in VPanel
In VPanel, you can register up to four machines� However, ve or more machines can be connected to the computer� This section
explains how to switch the machine to register in VPanel when ve or more machines are connected�
* Some models are not supported� For details, contact your authorized DGSHAPE Corporation dealer or access our website
(http://www�dgshape�com/)�
Procedure
A
Show VPanel.
" 
B
Click .
C
Click the [VPanel] tab, and then click [Select].