55
3. Maintenance
Maintenance Precautions
Maintenance Precautions
WARNING
Never use a pneumatic blower.
This machine is not compatible with a pneumatic blower. Milling waste may get inside the machine
and cause re or electrical shock.
WARNING
Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.
Doing so may cause a re.
WARNING
Caution: High Temperature
The milling tool and spindle motor become hot. Exercise caution to avoid re or burns.
CAUTION
Be careful around the milling tool.
The milling tool is sharp. Broken milling tools are also dangerous. To avoid injury, exercise caution.
CAUTION
Use a dry cloth when cleaning silicone resin parts, and be careful to prevent the silicone resin from
being damaged.
The silicone resin being damaged may lead to electric leakage.
CAUTION
Under no circumstances should you move the Z-axis unit with your hands.
Doing so may cause a breakdown.
• This machine is a precision device� Carry out daily care and maintenance�
• Carefully wipe away any uid or milling waste� Operating the machine with uid or milling waste present may cause
malfunction or breakdown�
• Never install this machine in an environment where silicone substances (oil, grease, spray, etc�) are present� Doing so may
cause poor switch contact�
To Next Page
Loading...
