Starting Milling
29
2. Milling
Step 3: Spindle run-in (short)
Be sure to perform the following tasks before daily operations� These tasks are necessary for maintaining a favorable machine
condition and for ensuring a high level of product quality� If these tasks are not executed, a message prompting operation will be
displayed in VPanel�
Procedure
A
Show VPanel.
" P. 6 "Displaying VPanel"
B
Select the machine to operate.
C
Click .
MEMO
If the icon is displayed as , run-in (long) is necessary. Refer to P. 95 "Spindle Run-In (Long)" and perform the
run-in.
To Next Page
Loading...
