Attaching the Retainer
Situations Requiring This Work
• When moving the machine
Attach the retainer to protect the machine from vibration during shipment�
Attaching the Retainer
Important
Make sure to drain all coolant lines before attaching the retainer�
"
1.
Move the position of the spindle head.
A
Check that no workpieces, milling burs, or correction jigs are present.
B
Close the front cover.
C
Show VPanel.
"
D
Select the machine to operate.
E
Click .
F
Click the [Maintenance] tab, and then click [Move to packing position].
Extended Periods of Non-Use / Moving the Machine
93
3. Maintenance
To Next Page
Loading...
