C
Remove any milling waste that remains on the tray.
D
Remove the drain cap of the coolant tank, and then drain the coolant.
Note
Dispose of coolant and milling waste appropriately in accordance with local regulations� Do not thoughtlessly dispose of them in
sewers or rivers or dump them in inappropriate locations� Doing so may have an adverse impact on the environment�
E
Clean the inside of the coolant tank.
Pour a little tap water into the tank, shake the tank to the left and right, and then dispose of the dirty water. Repeat
this operation two or three times.
F
Attach the drain cap to the coolant tank.
Periodic Care and Maintenance
64
3. Maintenance
To Next Page
Loading...
