D
Remove the lid of the coolant tank tray.
Tray lid
Tray
E
Tilt the coolant tank tray slightly to pour the accumulated coolant into the tank.
F
Remove any milling waste that remains on the tray.
G
Remove the drain cap of the coolant tank, and then drain the coolant.
Note
Dispose of coolant and milling waste appropriately in accordance with local regulations� Do not thoughtlessly dispose of them in
sewers or rivers or dump them in inappropriate locations� Doing so may have an adverse impact on the environment�
Extended Periods of Non-Use / Moving the Machine
89
3. Maintenance
To Next Page
Loading...
