CURRENT
PHASE
Displays the status of the connected machine.
Displays the spindle rotating speed of the connected machine.
Displays the name and work situation of the milling bur currently in use.
If “13h00m/15h00m" is shown, "13h00m" is the work time, and "15h00m"
is the service life.
Displays the adapter ID and disk type name that are currently in use.
Outputs the milling data.
" P.50 "Step 6: Outputting Milling Data and Starting Milling"
Cancels output of milling data and other functions.
Allows for registration and selection of milling burs.
" P.21 ""Milling bur management" Window"
Display the settings window.
" P.13 ""Settings" Tab"
" P.14 ""Maintenance" Tab"
" P.16 ""Mail" Tab"
" P.18 ""VPanel" Tab"
" P.19 ""DWINDEX" Tab"
Click this to access the DGSHAPE Corporation website.
VPanel Window and Functions
12
Chapter 1 Basic Operation
To Next Page
Loading...
