Dieci APOLLO MINI AGRI - Page 148

9 | Equipment
148 AXH1230‐UK ﴾ENG﴿ ‐ Apollo KM
– Slightlylifttheboomandrotatethetoolholderplateupwards,makingtheequipmentadheretothetool
holder plate of the vehicle. During this operation, make sure that no person is in the vicinity of the
equipmentorthevehicleboom.
– Refertothemanualofthevehicleinthechapterrelatedtotheuseofthequickcouplingtoclosethelock
cylinders“3”.
– Checkthatthelockcylinders"3"areproperlysecuredintheirseatsontheequipment"2".
– Intheeventthattheequipmentneedselectricalorhydraulicconnections,switchoffthevehicleandrefer
tothechapters"Hydraulic connections [}149]”and“Electrical Connections [}155]”.
– Onceproperlyfixedtheequipmentsetthecorrectmodeofoperationofthevehiclerelatedtothenewly
installedequipment:
– Check that in the cab there is the capacity diagram related to the vehicle and to the equipment just
installed.
DANGER
Do not operate without having properly secured the equipment to the plate, danger of
load and equipment falling.
Do not operate until both lock cylinders "3" are properly locked.