Digi XBee 3 ZigBee User Manual

API Operation Send Public Profile Commands with the API
Digi XBee® 3 Zigbee® RF Module
250
Frame Fields Offset
Description
Device class 30
This bit encoded field represents the Device Class
associated with the Load Control Event. A bit value of
0x0014 enables smart appliances and water heaters.
Note The 2-byte bit field value is sent in little endian
byte order.
31
Utility
enrollment
group
32 Used to identify sub-groups of devices in the device-
class. 0x00 addresses all groups.
Start time 33
34
35
36
Duration in
minutes
37 This 2-byte value must be sent in little endian byte
order.
38
Criticality
level
39 Indicates the criticality level of the event. In this
example, the level is “voluntary”.
Cooling
temperature
40
Requested offset to apply to the normal cooling set
point.
A value of 0xFF indicates the temperature offset
value is not used.
Heating
temperature
offset
41
Requested offset to apply to the normal heating set
point.
A value of 0xFF indicates the temperature offset
value is not used.
Cooling
temperature
set point
42
Requested cooling set point in 0.01 degrees Celsius.
A value of 0x8000 means the set point field is not
used in this event.
Note The 0x80000 is sent in little endian byte order.
43

Digi XBee 3 ZigBee Specifications

General

Brand	Digi
Model	XBee 3 ZigBee
Category	Control Unit
Language	English