Digi XBee 3 ZigBee - Page 307

Frame descriptions Extended Modem Status frame - 0x98 Digi XBee® 3 Zigbee® RF Module 307
Status
code
Transparent
mode string Description Status data Description
0x02 Joining An association request is being made. radioChannel
(1)
channel number ranging from 11 to 26 (0x0B to 0x1A)
radioTxPower
(1)
low level signed byte value for transmit power, values range
from 0xC9 to 0x05 inclusive
panid(2) 16 bit 4med' a network, or a Router/End Device has 'joined' a
network.
extendedPanId
(8)
64 bit PAN Identifier for network
0x03 Joined Joined - Coordinator “Formed:”, Router/End
Device “Joined”
0x04 Beacon
Response
Data received from a neighboring node in
response to a beacon request
ZS
[stackProfile]
(1)
See ZS (Zigbee Stack Profile).
extendedPanId
(8)
64 bit PAN Identifier for network
allowingJoin(1)
0x00 - not permitting joins to its network
0x01 - permitting joins to its network
radioChannel
(1)
channel number ranging from 11 to 26 (0x0B to 0x1A)
panid(2) 16 bit PAN Identifier for network
rssi(1) maximum relative signal strength indicator value measured
in units of dBm
lqi link quality indicator
0x05
Reject ZS Not an association candidate because ZS does
not match that given in the beacon response.