Digi XBee 3 ZigBee User Manual

Frame descriptions Extended Modem Status frame - 0x98 Digi XBee® 3 Zigbee® RF Module 310
Status
code
Transparent
mode string Description Status data Description
0x20 FormNetwork
- parameters
Forming a network radioChannel
(1)
channel number ranging form 11 to 26
radioTxPower
(1)
low level radio transmit power setting
panid(2) 16 bit PAN identifier for network
extendedpanid
(8)
64 bit PAN identifier for network
0x21
Discovering
KE Endpoint
Looking for Key Establishment Endpoint
0x22
KE Endpoint
Found Key Establishment Endpoint Endpoint(1) Endpoint number
The following example shows a successful association with Verbose Join enabled in AT Command mode.
Note Comments are included with the trace messages to explain the content and are preceded by an ellipsis “...”.
+++OK
atid3151 OK
...configured pan identifier has been changed atdc10
OK
...and verbose join enabled atac
OK
...applying changes to the configuration V AI - Searching for Parent:FF
...search has started
V AI - Searching for Parent:FF
...and started again

Digi XBee 3 ZigBee Specifications

General

Brand	Digi
Model	XBee 3 ZigBee
Category	Control Unit
Language	English