Index
72A-2570-01 Rev. K 07/2011 Index-5
Sub-Band A-15
Tabulation A-18
Transformer 5-5
Waveform A-16
Tabulation tab A-18
tap changer data, adding to SFRA database 5-7
Template Editor window, opening 4-1
temporary static-discharge grounds 3-12
Test Details Dialog Box with Advanced Test
Protocol (screenshot) 3-21
Test Details window 3-9
Advanced Test Protocol section 3-21
Test Equipment Editor 3-5, 3-16, A-19
opening 4-1
Test in Progress (screenshot) 3-24
Test in Progress indicator light 3-3
Test Init menu A-7
test leads
correct length C-4
correct positioning of B-1
described with pictures 1-3
optional, with photo and part number 1-3
specifications E-3
standard, with photo and part number 1-3
test results
default data storage locations 5-8
exporting to CSV files 5-10
representative samples 3-25
sample open-circuit responses 3-25
sample responses for one phase at different
times 3-29
sample responses for three phases of HV
delta winding 3-26
sample responses for three phases of HV
wye (star) winding 3-27
sample short-circuit responses 3-25
sample short-circuit responses for HV side
of a transformer 3-27
sample shorted turn response 3-29
troubleshooting 3-24
Test Selection Window (screenshot) 3-19
Test Setting Editor (screenshot) 4-3
test settings
creating 4-4
editing and deleting 4-4
test templates
associate with a transformer 3-4
creating 4-2
defined 4-1
deleting 4-3
editing 4-3
managing tests in 4-3
settings file for 5-12
Test Templates Tab of Transformer Editor
Window (screenshot) 3-7, 3-17
tests, managing in template 4-3
theory of operation for SFRA instruments C-1
three-winding transformers, test setup B-4
traces, saving and deleting 5-11
transferring data between M5300s or PCs 5-12
Transformer Editor window
LTC/DETC tab 5-7
Test Templates tab 3-7, 3-17
Transformer tab 3-6, 3-16
transformer files, importing and exporting 5-7
Transformer Settings File — User A
(screenshot) 5-14
Transformer Settings File — User B
(screenshot) 5-15
Transformer Tab of Transformer Editor
Window (screenshot) 3-6, 3-16
TransformerNameplate Section of User B’s
Settings File (screenshot) 5-16
transformers
adding to SFRA 5.2 database 3-6
adding to SFRA database 5-6
associate with a test template 3-4
cloning 5-6
good testing practices 3-14
grounding 3-12
importing data from a results file 5-11
RLC network C-5
settings file for 5-12
three-winding, test setup B-4
two-winding, test setup B-2
types of damage C-1
two-winding transformers, test setup B-2
Typical Open-Circuit Trace (screenshot) 3-25
To Next Page
Loading...
Need help?
General
